欢迎光临!我们是:罗茨风机水冷风机环形风机喷泉曝气机罗茨真空泵的生产厂家!
罗茨鼓风机原理与用途

— 新闻中心 —

联系我们/ CONTACT US
全国免费客服电话 400-155-8689
上海瑞柘环保设备集团有限公司

邮箱:sunnycommand@foxmail.com

手机:400-155-8689

电话:400-155-8689

地址:江苏省苏州市昆山市紫竹路699号保利大厦

您的位置:首页 >> 新闻中心 >> 行业新闻

行业新闻

中英双语分享气力输送中央供料系统选用罗茨风机的优点

发布时间:2022-05-13 14:18:39 人气:19

  我厂制造的三叶罗茨风机在气力输送情景中使用较多,公司长期与张家港数十家中央供料公司具备长期的合作关系!今日,大家就来谈一谈,中央供料系统与气力输送情景采用罗茨风机的优势!

  气力输送罗茨风机智能管理系统对空气源的选择很重要,有的气力输送系统在现场运用空气压缩机,有的用罗茨风机。也许原本二者之间都是为了更好地能够更好地发展趋向才被评选为气动阀门的,但他们各有不同。那么气力输送可以分为稀相气力输送和浓相髙压气力输送。通常,在运用状况下低压时运用罗茨风机,髙压时多应用空气压缩机。气力输送是全封闭式型管路输送系统软件,具备布局灵便,无二次污染,高放环保节能,有利于原材料输送和回收利用、无渗漏输送等优势,在许多领域里都有很普遍的运用。管路是气力输送系统软件的关键构成部分,那麼气力输送机器设备对管路有什么规定呢?下边恒荣机械设备就为我们梳理详细介绍。

气力输送中央供料系统Pneumatic conveying central feeding

  气力输送罗茨风机特点:

  1.螺旋模样在20以上的固定螺旋方法下,机壳进排汽管屏蔽双绞线进到螺旋,依据转子旋转渐渐地打开,进排汽管单脉冲轻微,操作过程声音小。转子采用尤其的模样,可以保持转子正中间的间隙,进一步提高功率。

  3、转子是三叶直线,切向偏位小的转子碰触。可以确保转子的间隙。

  4.由于运用精密加工加工中心生产加工转子,离心风机正中间无功效误差。除此之外,该转子在制造中一直处于平衡状态。虚拟服务器运行中未造成振动。

  5、选用高档市场销售促进管理体系的齿轮轴,不仅有效提升了应用限期,而且降低了噪音。因此,彻底消除了齿轮轴对设备导致较差侵犯。

  6、另一种采用导出来汽体清除,并没有一切油尘,外壳内部构造不用减压渣油润滑,滚柱轴承汽车机油类不易渗透到外壳内部构造的总体方案设计。

  在气力输送罗茨风机的运用中,气动阀门的选择十分重要,输送中坚力量的主要作用时间均在气动阀门。只需有效选择气动阀门机械设备,就能开展很多的工作上。,在正常情况下的应用情况下,运送粉体设备运用空气压缩机关键点耗能。现如今要充分考虑压力和流量,因而这一设备维护管理不仅不能快速保证绿色环保作用的科研,而且尽量配套设施运用的人流量也不合格,并且占地面积总面积也特别大。电动、柴油发动机依据三角皮带促进空气压缩机,变更曲轴结构,更改旋转方向,分析发动机曲轴,使液压缸匀速直线运动的工作上。虽然空气压缩机极有可能会在低压气力输送的工作方面旋转,但并不一定能更快的开展期待的输送生产量。不充分考虑空气压缩机,依据科学规范细致的专业能力教育实习,采用不一样专业领域的低压不断输送气动阀门——罗茨风机,完美解决这一部分问题。

  中央供料系统往往采用罗茨风机是由于罗茨风机不但可以吹,与此同时还可以完成负压力汲取的作用。领域中厂厂将负压力罗茨风机称之为罗茨真空泵!负压力吸送气力输送一般用罗茨真空泵作动力装置,将管道及箱式仓提成一定的真空泵情况,促使进气口在大气压强的效果下产生原材料粉粉料与汽体的两相流,经输送管道键入旋风除尘器。两相流在旋风除尘器内因为向心力及作用力的作用下,使绝大多数原材料与空气分离出来。少许的原材料与汽体进到除尘设备,根据除尘布袋功效使颗粒料与空气分离出来。

  中央供料系统气力输送机器设备对管线的需要有以下几个方面:

  1、输送管道弯管应选用金属复合材料,管路道路转弯半径一般为1.5米,*低水平为1.0米。

  2、输送管道各管段中间,管路与闸阀联接中间等插口,均应维持光滑,不应该有凹凸不平的状况。

  3、输送管道应设定支撑架和滑动支架。

  4、输送管道由立管连接母管时,一般宜选用水准连接或由上而下连接的方法,不适合选用自下往上连接的方法,也不能选用竖直往下后在水准输送的布局方式。

  5、在布局同一孔径的输送管道时,其水准段管路长短应不超过300m,当水准管路长短超出200m时,可选用更改输送方位的布局方式。

  6、输送管道可以在平面随意拐弯,竖直提高,在输送管道尾端可以选用竖直往下等布局方式。当遭受地貌标准限定,输送管道务必选用歪斜布局时,其倾斜角不可以超过5°。

  气力输送按原理大概可分成正压力输送与和负压力输送二种种类。恒荣机械设备正压力输送系统软件机器设备简易,管路合理布局,占地总面积小,实际操作便捷,工作中平稳,输送量大,零污染,输送全过程中还能够完成多种多样加工工艺实际操作,如混和粉碎、等级分类、干躁、制冷除灰和一些化学变化,工作效能高,非常大水平上提高效益。

  力气(气旋)输送系统软件的优势:

  1、输送管道能灵便地布局,进而使加工厂机器设备加工工艺配备有效,节约工业厂房项目投资。

  2、完成盘料输送,高效率,减少外包装和装卸搬运装卸费。

  3、系统软件密闭式,烟尘飞舞逸出少,清洁卫生标准好。

  4、健身运动零部件少,维护保养便捷,便于达到自动化技术。

  5、可以防止原材料返潮、破损或渗入其它脏物,可以确保输送原材料的品质。

  6、在输送全过程中可以完成多种多样加工工艺实际操作,如混和、破碎、等级分类、干躁、制冷和别的物理学反映。

  7、可以开展由数点集中化送到一处或由一处分散化送到数点的长距离实际操作。

  8、针对有机化学特性不稳定的原材料,可以选用可塑性气力输送。

  上海瑞柘环保设备集团有限公司是一家专门从业罗茨风机、罗茨真空泵的产品研发生产厂家,公司生产制造的罗茨泵与罗茨风机在透气膜输送系统软件,塑料薄膜生产流水线输送系统软件,天燃气管道输送系统软件,塑料薄膜干躁系统软件,塑料薄膜去湿系统软件塑料机集中化送料系统软件,中央供料系统,集中化上料系统软件,除湿干燥机,塑料干燥机,自动供料系统中使用普遍。其中央供料系统采用大家厂的罗茨泵或罗茨风机可确保所有系統的气体对原材料开展输送,避免去湿干躁后的原材料反潮,有利于提升成形商品的品质。


  The three leaf roots blower manufactured by our factory is widely used in the pneumatic conveying scenario. The company has long-term cooperative relations with dozens of central supply companies in Zhangjiagang for a long time! Today, let's talk about the advantages of Roots blower in the central feeding system and pneumatic conveying scenario!

  The intelligent management system of pneumatic conveying roots blower is very important for the selection of air source. Some pneumatic conveying systems use air compressor on site, and some use roots blower. Maybe both of them were selected as pneumatic valves for better development trend, but they are different. Then pneumatic conveying can be divided into dilute phase pneumatic conveying and dense phase high-pressure pneumatic conveying. Generally, roots blower is used under low pressure and air compressor is used under high pressure. Pneumatic conveying is a fully enclosed pipeline conveying system software, which has the advantages of convenient layout, no secondary pollution, high emission, environmental protection and energy saving, conducive to raw material conveying, recycling and leakage free conveying. It is widely used in many fields. Pipeline is a key component of pneumatic conveying system software. What are the regulations on pipeline of pneumatic conveying machinery and equipment? The following Hengrong machinery and equipment will give us a detailed introduction.

Pneumatic conveying central 气力输送中央供料 feeding

  Pneumatic conveying roots blower features:

  1. When the spiral pattern is fixed for more than 20, the shielded twisted pair of the steam inlet and exhaust pipe of the casing enters the spiral and is gradually opened according to the rotation of the rotor. The single pulse of the steam inlet and exhaust pipe is slight and the sound during operation is small. The rotor adopts a special shape, which can maintain the gap in the middle of the rotor and further improve the power.

  3. The rotor is a three blade straight line, and the rotor with small tangential deviation touches. The clearance of the rotor can be ensured.

  4. Due to the use of precision machining center to produce and process the rotor, there is no efficiency error in the middle of the centrifugal fan. In addition, the rotor is always in balance during manufacturing. The virtual server did not cause vibration during operation.

  5. Selecting the gear shaft of high-grade market sales promotion management system not only effectively improves the application deadline, but also reduces the noise. Therefore, the poor impact of the gear shaft on the equipment is completely eliminated.

  6. The other is the overall scheme design in which the guided steam is used to remove all oil dust, the internal structure of the shell is not lubricated by vacuum residue, and the roller bearing automobile oil is not easy to penetrate into the internal structure of the shell.

  In the application of pneumatic conveying roots blower, the selection of pneumatic valve is very important. The main action time of the backbone of conveying is in the pneumatic valve. As long as the mechanical equipment of pneumatic valve is effectively selected, a lot of work can be carried out., Under normal conditions, the key points of air compressor are used for transporting powder equipment to consume energy. Nowadays, pressure and flow should be fully considered. Therefore, this equipment maintenance and management can not quickly ensure the scientific research of green environmental protection, and the flow of people using supporting facilities as far as possible is also unqualified, and the total floor area is also very large. The electric and diesel engines promote the air compressor according to the triangular belt, change the crankshaft structure, change the rotation direction, analyze the engine crankshaft, and make the hydraulic cylinder move in a straight line at a uniform speed. Although the air compressor is likely to rotate in the work of low-pressure pneumatic conveying, it may not be able to carry out the expected conveying production faster. The air compressor is not fully considered. According to scientific, standardized and detailed professional ability education and practice, roots blower, a low-pressure pneumatic valve in different professional fields, is used to perfectly solve this part of the problem.

  Roots blower is often used in the central feeding system because it can not only blow, but also absorb negative pressure. In the field, the factory calls the negative pressure roots blower roots vacuum pump! The negative pressure suction pneumatic conveying generally uses the roots vacuum pump as the power device to lift the pipeline and box warehouse into a certain vacuum pump, so as to promote the two-phase flow of raw material powder and steam at the air inlet under the effect of atmospheric pressure, which is input into the cyclone through the conveying pipeline. Under the action of centripetal force and force, the two-phase flow separates most of the raw materials from the air in the cyclone. A little raw materials and steam enter the dust removal equipment to separate the granular material from the air according to the effect of the dust removal bag.

  The pipeline requirements of pneumatic conveying machinery and equipment of central feeding system include the following aspects:

  1. The bend of transmission pipeline shall be made of metal composite materials. The turning radius of pipeline road is generally 1.5m and the minimum level is 1.0m.

  2. The sockets in the middle of each pipe section of the transmission pipeline and in the middle of the connection between the pipeline and the gate valve shall be kept smooth and free from unevenness.

  3. Support frame and sliding support shall be set for transmission pipeline.

  4. When the transmission pipeline is connected with the main pipe by the riser, the method of horizontal connection or top-down connection should generally be selected. It is not suitable to select the method of bottom-up connection, nor the layout of horizontal transmission after vertical down.

  5. When arranging the transmission pipeline with the same aperture, the length of the leveling section shall not exceed 300m. When the length of the leveling pipeline exceeds 200m, the layout method of changing the transmission direction can be selected.

  6. The transmission pipeline can be bent freely in the plane and raised vertically. The layout mode of vertical down can be selected at the tail end of the transmission pipeline. When subject to the limitation of geomorphic standards, the inclined layout must be selected for the transmission pipeline, and the inclined angle shall not exceed 5 °.

  According to the principle, pneumatic conveying can be roughly divided into positive pressure conveying and negative pressure conveying. Hengrong mechanical equipment positive pressure conveying system software has the advantages of simple machine equipment, reasonable pipeline layout, small total area, convenient actual operation, stable operation, large conveying capacity and zero pollution. It can also complete the actual operation of a variety of processing processes in the whole process of conveying, such as mixing and crushing, grade classification, dryness, refrigeration ash removal and some chemical changes. It has high work efficiency and improves benefits to a very large extent.

  Advantages of force (cyclone) transportation system software:

  1. The transmission pipeline can be arranged flexibly, so that the processing equipment and processing technology of the processing plant can be equipped effectively, and the investment of industrial plant project can be saved.

  2. Complete the material transportation, high efficiency and reduce the cost of external packaging and handling.

  3. The system software is closed, with less smoke and dust flying and escaping, and good cleaning and hygiene standards.

  4. There are few fitness parts, convenient maintenance and easy to achieve automation technology.

  5. It can prevent raw materials from returning to moisture, damage or infiltration of other dirt, and ensure the quality of transported raw materials.

  6. In the whole process of transportation, various practical operations of processing processes can be completed, such as mixing, crushing, grade classification, dryness, refrigeration and other physical reactions.

  7. It can carry out long-distance practical operation by centralizing a number of points to one place or dispersing a number of points to a number of points.

  8. For raw materials with unstable organic chemical properties, plastic pneumatic conveying can be selected.

  Shanghai Ruizhe Environmental Protection Equipment Group Co., Ltd. is a manufacturer specializing in the R & D and production of Roots blower and roots vacuum pump. The roots pump and roots blower produced by the company include breathable membrane conveying system software, plastic film production line conveying system software, natural gas pipeline conveying system software, plastic film drying system software, plastic film dehumidification system software, plastic machine centralized feeding system software and central feeding system, Centralized feeding system software, dehumidification dryer, plastic dryer and automatic feeding system are widely used. The central feeding system adopts roots pump or roots blower of our factory, which can ensure that the gas of all systems can transport the raw materials, avoid the anti moisture of raw materials after dehumidification and drying, and improve the quality of formed goods.


相关推荐

在线客服
服务热线

服务热线

400-155-8689

微信咨询
中英双语分享气力输送中央供料系统选用罗茨风机的优点-[瑞柘环保]
返回顶部
X中英双语分享气力输送中央供料系统选用罗茨风机的优点-[瑞柘环保]

截屏,微信识别二维码

微信号:{label:wx}

(点击微信号复制,添加好友)

  打开微信

微信号已复制,请打开微信添加咨询详情!