欢迎光临,瑞柘环保设备集团-竭诚为您提供罗茨风机定制、安装、维修、保养服务!

三叶罗茨鼓风机生产厂家

诚信企业︱曝气风机︱供料风机︱生产厂家

咨询热线:

400-155-8689 15900463963

上海瑞柘环保设备集团有限公司

常见问题

问:漩涡风机与罗茨风机的区别有哪些?

  • 作者:超级管理员
  • 发布时间:2022-06-30
  • 点击:868

 答:以我个人对漩涡风机与罗茨风机的了解,二者之间的区别主要有以下几种。

漩涡风机与罗茨风机的区别在哪

  漩涡风机罗茨风机都是依靠机械转动带动泵体内部的叶片旋转,依靠离心力的作用原理,来达到压缩气体目的的机械设备,不过它们之间也存在一定的区别:

  1、性质不同

  漩涡风机属于透平式风机,而罗茨风机属于容积式风机。

  2、外形不同

  漩涡气泵外形比较紧凑,进出风口在风机的低部,体积小,采用铝合金材料,重量较轻,强度高;罗茨风机采用皮带轮带动泵腔工作,体积比较大,而制作材质为一般为铸铁,重量较沉。

  3、参数不同

  同等功率下,旋涡气泵与罗茨风机的初始流量相差不大,压力稍低,罗茨鼓风机因为泵腔较大,所以流量和压力要稍高。

  4、保养不同

  漩涡风机基本不需要保养维护,只要注意对漩涡气泵做简单保养,及高压漩涡风机轴承保养两个方面即可;罗茨风机需要定期维护,比如加润滑油,更新齿轮油脂等。

  5、价格不同

  同等功率下,漩涡气泵价格相对比较便宜,而罗茨风机较贵。

  二、漩涡风机和罗茨风机效率哪个好

  漩涡风机和罗茨风机的效率比较方面并不是固定的,因为不同领域的应用需求不同,也会影响到风机的效率方面,要想知道漩涡风机和罗茨风机哪个好,我们可以来比较一下:

  旋涡风机是靠离心力将气体送出,罗茨风机是强制输送气体,也就是压缩气体输送。以污水处理为例,漩涡风机适用于小型的水池供氧,经济划算;罗茨风机使用于大型的污水处理,风压比较大。选用时根据你使用的压力和气量,一般风压大,气量大的选罗茨风机的更适合。但如果风压在20KPa以内,气量较大,选用漩涡风机更合适一些。

 

漩涡风机与罗茨风机的区别有哪些

  漩涡风机与罗茨风机的区别,两者之间的运行原理大致相同,都是依靠机械转动带动泵体内部的叶片旋转,依靠离心力的作用原理,来达到压缩气体的目的,具体的运行可参考:漩涡气泵运行原理,他们之间的区别主要集中在以下方面;

  一、外形

  漩涡气泵外形比较紧凑,进出风口在风机的低部,体积小,采用铝合金材料,重量较轻,强度高;罗茨风机采用皮带轮带动泵腔工作,体积比较大,而制作材质为一般为铸铁,重量较沉,耐温性能比较差,在高温工作时,会被氧化

  二、参数

  同等功率下,旋涡气泵与罗茨风机的初始流量相差不大,压力稍低,罗茨鼓风机因为泵腔较大,所以流量和压力要稍高;比如污水曝气行业,小面积一般采用旋涡气泵的比较多,而如果大面积或水位较深的情况下,一般采用罗茨风机

  三、保养

  高压鼓风机基本不需要保养维护,只要注意两个方面即可,参考:如何对漩涡气泵做简单保养,及高压漩涡风机轴承保养,压力和进气干净度,使用非常方便;而罗茨风机维护定期维护,比如加润滑油,更新齿轮油脂等,也很方便

  四、价格

  同等功率下,漩涡气泵价格相对比较便宜,而罗茨风机较贵,各有各的用途,各有各的优点五、关于选择

  在选择的时候,要根据自己的实现情况来看,不要一味地听销售人员推销,我们选择适合自己工况的,的才是**的结果

  经常有客户在选型的时候问到,罗茨风机和我们这种漩涡风机哪种好呢,有什么区别的地方呢,对于这个问题,上篇文章有讲到过两者之间的区别,不明白的客户可以参考:漩涡气泵与罗茨鼓风机的区别,那么罗茨风机与漩涡风机哪种更好呢,对于这个问题,还得从它们的工作原理模式开始:

  罗茨风机:属于容积式风机,为一个泵体中,内置有两个叶轮,由于精密的实际及安装位置精准,这两个叶轮转动时互不接触,互不干扰,其间留有很小的间隙,以此来产生压力和流量,因为它的泵体较大较长,所以流星也相对较大,可采用直连方式或皮带连接方式。

  漩涡风机:漩涡风机属于气环式风机,内部的叶轮边缘有很多大小规则均匀的小叶片,并以此来产生压力和流量,每个叶片与叶片之间都会形成一定量的漩涡式的风量,不断加压递增,*终传出泵体外部,一般为直连方式,后又生产出不带电机的泵头,可采皮带连接方式。

  在明白了两者之间的原理之后,再来看下用途中的区别!

  罗茨风机常用于水产养殖增氧曝气、污水处理增氧曝气、水泥物料的输送等,更适用于高压力大流量的气体输送和加压系统。旋涡风机广泛用于各类机械设备的配套,工业、化工、电子行业等都有涉及,及各类实验室的加压实验装置,可参考:漩涡气泵可用在哪些行业和漩涡气泵可用在哪些设备,体积小,不用维护。

  **对于罗茨风机与漩涡风机哪种好,两者之间不具备大多的可比性,都有各自的实用领域及优点,并且制造材质也不一样,罗茨鼓风机为铸铁,旋涡风机为铝合金,如果进气有水汽之类的,**使用旋涡风机,如何所需要的流量很大,压力很高,那就需要用到罗茨风机了。

  What is the difference between vortex blower and roots blower

  Vortex fan and Roots fan are both mechanical equipment that rely on mechanical rotation to drive the blades inside the pump body to rotate, and rely on the action principle of centrifugal force to achieve the purpose of compressing gas. However, there are certain differences between them:

  1. Different nature

  Vortex fan belongs to turbine fan, while Roots fan belongs to positive displacement fan.

  2. Different shape

  The vortex air pump is compact in shape. The air inlet and outlet are at the lower part of the fan. It is small in volume and made of aluminum alloy. It is light in weight and high in strength; Roots blower uses belt pulley to drive the pump chamber to work, which is relatively large in volume, and generally made of cast iron, which is heavy in weight.

  3. Different parameters

  Under the same power, the initial flow of the vortex air pump and the roots blower is similar, and the pressure is slightly lower. The roots blower has a larger pump chamber, so the flow and pressure should be slightly higher.

  4. Different maintenance

  The vortex fan basically does not need maintenance, as long as you pay attention to the simple maintenance of the vortex air pump and the bearing maintenance of the high-pressure vortex fan; Roots blower needs regular maintenance, such as adding lubricating oil, updating gear grease, etc.

  5. Different prices

  Under the same power, the price of vortex air pump is relatively cheap, while roots blower is more expensive.

  2、 Which is better, vortex fan or Roots fan

  The efficiency comparison between vortex blower and roots blower is not fixed, because the application requirements in different fields are different, which will also affect the efficiency of the blower. To know which is better, we can compare the vortex blower and roots blower:

  The vortex fan sends out the gas by centrifugal force, and the Roots fan forcibly transports the gas, that is, compressed gas. Taking sewage treatment as an example, the vortex fan is suitable for supplying oxygen to small pools, which is economical and cost-effective; Roots blower is used for large-scale sewage treatment with high wind pressure. According to the pressure and air volume you use, the roots blower is more suitable for large air pressure and large air volume. However, if the wind pressure is within 20KPa and the air volume is large, the vortex fan is more suitable.

  The operating principle of vortex blower and roots blower is roughly the same. They both rely on mechanical rotation to drive the blades inside the pump body to rotate, and rely on the action principle of centrifugal force to achieve the purpose of compressing gas. For specific operation, please refer to: the operating principle of vortex air pump. The differences between them mainly focus on the following aspects;

  1、 Profile

  The vortex air pump is compact in shape. The air inlet and outlet are at the lower part of the fan. It is small in volume and made of aluminum alloy. It is light in weight and high in strength; Roots blower uses belt pulley to drive the pump chamber to work, which is relatively large in volume. However, its material is generally cast iron, which is heavy in weight and poor in temperature resistance. When it works at high temperature, it will be oxidized

  2、 Parameters

  At the same power, the initial flow of the vortex air pump and the roots blower is similar, and the pressure is slightly lower. The roots blower has a larger pump chamber, so the flow and pressure should be slightly higher; For example, in the sewage aeration industry, vortex air pumps are often used in small areas, while roots fans are generally used in large areas or deep water levels

  3、 Maintenance

  The high-pressure blower basically does not need to be maintained. Just pay attention to two aspects. For reference: how to do simple maintenance for the vortex air pump, and the bearing maintenance for the high-pressure vortex fan, and the pressure and air inlet cleanliness, which are very convenient to use; It is also convenient to maintain roots blower regularly, such as adding lubricating oil and updating gear grease

  4、 Price

  Under the same power, the price of the vortex air pump is relatively cheap, while the roots blower is more expensive. Each has its own uses and advantages. V. about selection

  When making choices, we should look at our own implementation situation. Don't blindly listen to the sales staff. We should choose the one that suits our working conditions, and the best result is the one

  When selecting models, customers often ask which kind of Roots blower is better than our vortex blower, and what is the difference between them. For this problem, the last article talked about the difference between the two. For customers who do not understand it, they can refer to the difference between the vortex air pump and roots blower, and which kind of Roots blower is better. For this problem, we have to start from their working principle mode:

  Roots blower: it is a positive displacement blower. Two impellers are built in one pump body. Due to the precise actual and accurate installation position, the two impellers do not contact and interfere with each other when rotating, leaving a small gap between them to generate pressure and flow. Because its pump body is large and long, the meteor is also relatively large. Direct connection or belt connection can be used.

  Whirlpool fan: whirlpool fan is an air ring fan. There are many small blades with regular and uniform size at the edge of the internal impeller to generate pressure and flow. A certain amount of whirlpool air volume will be formed between each blade and the blade, which will be continuously pressurized and gradually increased. Finally, it will be sent out of the pump body. Generally, it is directly connected, and then the pump head without motor will be produced. Belt connection can be adopted.

  After understanding the principle between the two, let's look at the difference in use!

  Roots blower is commonly used in aquaculture aeration, sewage treatment aeration, cement material transportation, etc., and is more suitable for high pressure and large flow gas transportation and pressurization systems. Vortex fans are widely used for supporting various mechanical equipment, including industrial, chemical and electronic industries, as well as pressurized experimental devices in various laboratories. For reference: in which industries and in which equipment vortex air pumps can be used, they are small and do not need maintenance.

  Finally, there is no much comparability between Roots blower and vortex blower. Both of them have their own practical fields and advantages, and the manufacturing materials are also different. Roots blower is made of cast iron and vortex blower is made of aluminum alloy. If there is water vapor in the intake air, it is best to use vortex blower. If the flow required is very large and the pressure is very high, roots blower is needed.


Copyright © 2021上海瑞柘环保设备集团有限公司 技术支持:昆山网站建设 沪ICP备14047048号 XML地图 
在线客服
联系方式

热线电话

15900463963

上班时间

周一到周五

公司电话

400-155-8689

线