答：三相潜水泵反转时电流不高，一般不会引起电缆的发热或高温！若有这种情况发生，请尽快拉闸断电！防止有漏电或触电的发生！下面介绍几种解决三相潜水泵反转的方法给大家！

　　1、假如是三相电机的水泵设备，就可以任意把两相的位置改变，这样水泵转动方向也会改变。

　　2、要是是单相电机启动的水泵设备，可以调一下接点位置，比如把接点从X换到Y位置，这样水泵的方向就会发生改变。

　　3、如果水泵出现小故障，请使其不工作。如果水泵轴上的密封垫磨损，则必须及时添加填料，如果继续使用，空气会漏出，这样做会直接增加了电动机的能耗，从而损坏了叶轮。

三相潜水泵反转时会导致电动机反转，从而水泵倒转，也可以出水，但是出水量很小。如果想正转，只需要将其中任意两相对调接线即可。

　　Answer: the current is not high when the three-phase submersible pump reverses, which generally will not cause the cable to heat up or high temperature! If this happens, please switch off the power as soon as possible! Prevent electric leakage or electric shock! Here are some ways to solve the reverse rotation of three-phase submersible pump!

　　1. If it is a water pump equipment with three-phase motor, the position of the two phases can be changed at will, so the rotation direction of the water pump will also change.

　　2. If it is a water pump equipment started by a single-phase motor, you can adjust the contact position, such as changing the contact from X to y, so that the direction of the water pump will change.

　　3. If the water pump has a small fault, please make it inoperative. If the sealing gasket on the water pump shaft is worn, packing must be added in time. If it continues to be used, air will leak out, which will directly increase the energy consumption of the motor and damage the impeller.

　　When the three-phase submersible pump reverses, it will cause the motor to reverse, so that the pump reverses, and water can also be discharged, but the water output is very small. If you want to turn forward, you only need to adjust any two of them to the wiring.

　　Will the reversing cable of three-phase submersible pump heat up at high temperature